Filter
Top Products
Prepare the Slot For Use
To prepare a slot, you must first remove the metal slot cover. Then, if a plastic frl!er card is
installed in the slot, remove it.
(Retain slot covers and filler cards- they should be installed
when slots are not in use.) If a slot divider is not installed, you must install one. Figure l-7
shows the applicable hardware.
Removing Slot Covers
Using a Torx T-10 or 3/164nch flat-blade screwdriver, unscrew the slot cover retaining
screws and remove the slot cover for the selected slot.
Slot Divider
Filler Card
Figure 1-7. Slot Cover, Filler Card, and Slot Divider
t-14 Installing the Adapter