Filter
Top Products
Removal/Replacement of the Card
For card removal, follow the procedures below:
1. Before removing the card, ensure that the operating system is shut down and that
power to the host computer is off. Consult your computer system manuals for
proper shutdown procedures to avoid corruption or loss of data.
2. Access the f/O cardcage according to instructions in your system manuals.
3. Disconnect the cables from the card.
4. Unscrew the two retaining screws that secure the card to the cardcage.
5. Simultaneously lift both extractor levers on the card. This will disconnect the card
from the HP-PB backplane connectors.
6. Slide the card out of its slot.
To install a replacement card, follow the procedures described in chapter 1.
2-10 Service Information