Filter
Top Products
Removal and Replacement of Parts (without Calibration) 7-29
Replacement of Parts
Replacement of Fan
You will be removing the fan case from the printer and installing a new fan.
Removing the Fan
Step 1. Remove the Main Case (refer to the
procedures in Removing the Main Case
from Replacement of Main Case).
Step 2. Disconnect the connector of the fan to the
motor as well as the connector of the main
access door sensor.
Step 3. Remove the fan by unlatching the catch
securing the fan and sliding it out. Be
careful of wires and connectors.
www.GovTechMedia.com