Filter
Top Products
Removal and Replacement of Parts (with Calibration)10-30
Replacement of Parts
Replacement of Idler Assembly
You will be removing the idler assembly from the printer and installing a new idler assembly.
Removing the Idler Assembly
Step 1. Remove the Main Case (refer to the
procedures in Removing the Main
Case from Replacement of Main
Case).
Step 2. Slacken the tension on the drive belt by
pushing the idler assembly inwards till
the belt comes loose.
Step 3. Remove the idler assembly by pushing
the lever inwards from the left and slide
the idler assembly out.
www.GovTechMedia.com