Filter
Top Products
Removal and Replacement of Parts (with Calibration) 10-11
Replacement of Parts
Replacement of Pick Roller
You will be removing the pick roller from the printer and installing a new pick roller.
Removing the Pick Roller
Step 1. Remove the Drive Roller (refer to the
procedures in Removing the Drive
Roller from Replacement of Drive
Roller).
Step 2. Remove the two pick roller bearings on
the left and right of the print mechanism.
Step 3. Slide the pick roller out from the left,
then detach it from the main chassis.
Ensure that the clutch spring gear is not
shaken loose.
www.GovTechMedia.com