Filter
Top Products
Removal and Replacement of Parts (with Calibration) 10-3
Replacement of Parts
Replacement of Assembly Platen
You will be removing the assembly platen from the printer and installing a new assembly platen.
Removing the Assembly Platen
Step 1. Remove the Main Case (refer to the
procedures in Removing the Main
Case from Replacement of Main
Case).
Step 2. Detach the MIDS by removing the
MIDS tube clip from the carriage
assembly and the center screw between
the letters C and M on the print carriage.
Step 3. Move the delivery tube hook clear of the
chassis.
Step 4. Remove the top and bottom screws from
the bracket encoder.
www.GovTechMedia.com