Filter
Top Products
Removal and Replacement of Parts (with Calibration)10-14
Replacement of Parts
Installing the Paper Tray
Step 1. Slide tray 1 into the printer, ensuring that the positioning tabs on the underside are properly
seated into position.
Step 2. Reattach the connector on the left.
Step 3. Replace all six screws to fasten the tray in position.
Step 4. Reattach the left and right end-caps, ensuring that the retaining tabs snap properly into place.
Step 5. Replace the remaining components for the Pick Roller (refer to the procedures in Installing the
Pick Roller from Replacement of Pick Roller).
www.GovTechMedia.com