Filter
Top Products
4–8 Hardware and Software Guide
Multimedia
CD and DVD Procedures
Inserting or Removing a Disc
Use the following procedures to insert or remove an optical disc
such as a CD or a DVD. A disc that is playing must be stopped
before it can be removed. To stop a disc, press the
fn+f10 hotkey.
■ To insert a disc—Be sure the notebook is turned on. Then
press the release button 1 on the drive bezel to release the
media tray. Pull the tray outward 2, place the disc label-side
up on the media tray 3, and then close the media tray 4.
■ To remove a disc while the notebook is turned on—Press
the
release button on the drive bezel to release the media tray.
Pull the tray outward, remove the disc, and then close the
media tray.
■ To remove a disc while the notebook is turned off:
a. Insert the end of a small object like a paper clip into
the
release access 5 in the front bezel of the drive.
b. Press gently on the paper clip until the media tray is
released.
c. Pull the tray outward, remove the disc, and then close
the
media tray.