Filter
Top Products
[FTP-Server] local-user aaa
[FTP-Server-luser-aaa] password cipher hello
[FTP-Server-luser-aaa] service-type ftp
[FTP-Server-luser-aaa] authorization-attribute work-directory flash:/aaa
• Use text editor on the FTP server to edit batch file auto-update.txt. The following is the content of the
batch file:
return
startup saved-configuration new-config.cfg
boot-loader file soft-version2.bin slot 1 main
reboot
2. Configure Device
# Log in to the FTP server (The prompt may vary with servers.)
<Device> ftp 2.2.2.2
Trying 2.2.2.2 ...
Press CTRL+K to abort
Connected to 2.2.2.2.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(2.2.2.2:(none)):aaa
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Download file auto-update.txt on the FTP server.
[ftp] ascii
[ftp] get auto-update.txt
# Download file new-config.cfg on the FTP server.
[ftp]get new-config.cfg
# Download file soft-version2.bin on the FTP server.
[ftp] binary
[ftp] get soft-version2.bin
[ftp] bye
<Device>
# Change the extension of file auto-update.txt to .bat.
<Device> rename auto-update.txt auto-update.bat
To ensure correctness of the file, use the more command to view the content of the file.
# Execute the scheduled automatic execution function to enable Device to be automatically upgraded at
3 am.
<Device> system-view
[Device] job autoupdate
[Device-job-autoupdate] view system-view
[Device-job-autoupdate] time 1 one-off at 03:00 command execute auto-update.bat
To check if the upgrade is successful after Device reboots, use the display version command.
124