Filter
Top Products
To do… Use the command… Remarks
Configure the data
bits
databits { 5 | 6 | 7 | 8 }
Optional
By default, the data bits is 8.
Data bits is the number of bits
representing one character. The
setting depends on the contexts to
be transmitted. For example, you
can set it to 7 if standard ASCII
characters are to be sent, and set it
to 8 if extended ASCII characters
are to be sent.
Define a shortcut
key for starting a
session
activation-key character
Optional
By default, you can press Enter to
start a session.
Define a shortcut
key for terminating
tasks
escape-key { default | character }
Optional
By default, you can press Ctrl+C to
terminate a task.
Configure the flow
control mode
flow-control { hardware | none |
software }
Optional
By default, the value is none
Configure the type
of terminal display
terminal type { ansi | vt100 }
Optional
By default, the terminal display type
is ANSI.
The device supports two types of
terminal display: ANSI and VT100.
HP recommends that you set the
display type of both the device and
the client to VT100. If the device and
the client use different display types
(for example, hyper terminal or
Telnet terminal) or both are set to
ANSI, when the total number of
characters of the edited command
line exceeds 80, an anomaly such
as cursor corruption or abnormal
display of the terminal display may
occur on the client.
Configure the user
privilege level for
login users
user privilege level level
Optional
3 by default.
Set the maximum
number of lines on
the next screen
screen-length screen-length
Optional
By default, the next screen displays
24 lines at most.
A value of 0 disables the function.
Set the size of the
history command
buffer
history-command max-size value
Optional
By default, the buffer saves 10
history commands at most.
63