Filter
Top Products
To do… Use the command… Remarks
Set the idle-timeout
timer
idle-timeout minutes [ seconds ]
Optional
The default idle-timeout is 10
minutes. The system automatically
terminates the user’s connection if
no information interaction occurs
between the device and the user
within the idle-timeout time.
Setting idle-timeout to 0 disables the
timer.
CAUTION:
• The common settings configured for console login take effect immediately. If you confi
g
ure the common
settings after you log in through the console port, the current connection may be interrupted. To avoid
this problem, use another login method. After you configure the common settings for console lo
g
in, you
will need to modify the settings on the terminal to make them consistent with those on the device.
• The baud rate of the console port must be lower than the transmission rate of the modem. Otherwise,
packets may be lost.
Displaying and maintaining CLI login
To do… Use the command… Remarks
Display the source IP
address/interface specified for
Telnet packets
display telnet client configuration
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Display information about the user
interfaces that are being used
display users [ | { begin | exclude
| include } regular-expression ]
Available in any view
Displays information about all user
interfaces that the device supports
display users all [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display user interface information
display user-interface [ num1 |
{ aux | vty } num2 ] [ summary ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
64