Filter
Top Products
Command Effective system time Configuration example
System time
date-time in the daylight
saving time range, but
date-time – summer-offset
outside the summer-time
range:
date-time – summer-offset
c
lock timezone
zone-time add 1
clock summer-time
s
s
one-off 1:00
2008
/
1/1 1:00
2008/8/8 2
clock datetime 1:3
0
2008/1/1
23:30:00 zone-time Mon
12/31/2007
Both date-time and
date-time – summer-offset
in the daylight saving time
range:
date-time
c
lock timezone
zone-time add 1
clock summer-time
s
s
one-off 1:00
2008
/
1/1 1:00
2008/8/8 2
clock datetime 3
:
00
2008/1/1
03:00:00 ss Tue
01/01/2008
Configuration procedure
Follow these steps to change the system time:
To do… Use the command… Remarks
Set the system time and date clock datetime time date
Optional
Available in user view.
Enter system view system-view —
Set the time zone
clock timezone zone-name { add |
minus } zone-offset
Optional
Universal time coordinated (UTC)
time zone by default.
Set a daylight saving time scheme
Set a non-recurring scheme:
clock summer-time zone-name
one-off start-time start-date
end-time end-date add-time
Set a recurring scheme:
clock summer-time zone-name
repeating start-time start-date
end-time end-date add-time
Optional
Use either command.
By default, daylight saving time is
disabled, and the UTC time zone
applies.
Enabling displaying the copyright statement
The device by default displays the copyright statement when a Telnet or SSH user logs in, or when a
console user quits user view. You can disable or enable the function as needed. The following is a sample
copyright statement:
******************************************************************************
* Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
Follow these steps to enable displaying the copyright statement:
129