Filter
Top Products
and password on the remote authentication server. For more information about authentication modes
and parameters, see the Security Configuration Guide. Keep your username and password.
The following table lists modem login configurations for different authentication modes:
Authentication
mode
Configuration Remarks
None Configure not to authenticate users
For more information, see
“Configuring none
authentication for modem
login.”
Configure to authenticate users by using the local
password
Password
Set the local password
For more information, see
“Configuring password
authentication for modem
login.”
Configure the authentication scheme
Configure a
RADIUS/HWTACAC
S scheme
Configure the AAA
scheme used by the
domain
Remote AAA
authentication
Configure the
username and
password on the AAA
server
Configure the
authentication
username and
password
Scheme
Select an
authentic
ation
scheme
Local authentication
Configure the AAA
scheme used by the
domain as local
For more information, see
“Configuring scheme
authentication for modem
login.”
NOTE:
Modem login authentication changes do not take effect until you exit the CLI and log in again.
Configuring none authentication for modem login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see “Configuration requirements.”
Configuration procedure
Follow these steps to configure none authentication for modem login:
56