Filter
Top Products
To do… Use the command… Remarks
Enter system view system-view —
Enter one or more AUX user
interface views
user-interface aux first-number
[ last-number ]
—
Specify the none authentication
mode
authentication-mode none
Required
By default, users that log in through
the console port are not
authenticated.
Configure common settings for VTY
user interfaces
—
Optional
See “Configuring common settings
for VTY user interfaces (optional).”
When you log in to the device through modems after the configuration, you are prompted to press Enter.
A prompt such as <HP> appears after you press Enter, as shown in Figure 24.
Figure 24 Configuration page
Configuring password authentication for modem login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see “Configuration requirements.”
Configuration procedure
Follow these steps to configure password authentication for modem login:
57