Filter
Top Products
# Enable the HTTPS service.
[Device] ip https enable
# Create a local user named usera, set the password to 123 for the user, and specify the Telnet service
type for the local user.
[Device] local-user usera
[Device-luser-usera] password simple 123
[Device-luser-usera] service-type telnet
2. Configure the host that acts as the HTTPS client
On the host, run the IE browser. In the address bar, enter http://10.1.2.2/certsrv and request a certificate
for the host as prompted.
3. Verify the configuration
Enter https://10.1.1.1 in the address bar, and select the certificate issued by new-ca. Then the web login
page of the Device appears. On the login page, type the username usera, and password 123 to enter
the web management page.
NOTE:
• To log in to the web interface through HTTPS, enter the URL address starting with https://. To lo
g
in to
the web interface through HTTP, enter the URL address starting with http://.
• For more information about PKI configuration commands, see the
Security Command Reference
.
• For more information about the public-key local create rsa command, see the
Security Command
Reference
.
• For more information about SSL configuration commands, see the
Security Command Reference
.
73