Filter
Top Products
Shared phone line 11
English
Use the fax setup tables
Use the fax setup tables to assist you in setting up the fax function on your device. To use the tables, follow these
steps:
ᕡ Determine how you will use the phone line that your fax machine will be using:
Once you determine how you want to use the phone line, follow these steps:
ᕢ In the first row, determine what other devices will
share the phone line with the all-in-one (phone,
computer, answering machine).
ᕣ In the next rows, determine if the phone line has any
special services (voicemail or distinctive ring), and, if the
phone line will be used with a computer, determine if
you have a dial-up or DSL modem.
ᕤ The next row provides an example of what your fax
setup might look like in terms of how to connect various
devices to the all-in-one.
ᕥ In the last row of the table are numbers that
correspond to the Configuration guideline table on
page 13. Use the Configuration guideline table to help
you set up your all-in-one so that it operates the most
effectively based on the way your all-in-one is set up.
NOTE: You must follow the numbers as they appear in
the last row of each fax setup table. Performing the steps
out of sequence may result in fax setup problems.
Table 3-1 Voice and Fax
• Voice and Fax (see Table 3-1) • Voice, Fax, and Internet (dial-up) (see Table 3-3)
• Fax and Internet (see Table 3-2) • Voice, Fax, and Internet (DSL) (see Table 3-4)
What devices will you
connect to the device?
Telephone • Telephone
• Answering machine
Does your line have…
Distinctive ring service Distinctive ring service
Your fax setup should look
like this…
Then follow configuration #
3 1, 9, 2 1, 7 1, 9, 7