Filter
Top Products
Introduction
Power Management
1-10
9. Select the CD-ROM Drive then press Enter.
10. Choose option 3:
Create Hibernate Partition (erases Hard Disk)
11. Choose Y to Continue.
12. When prompted for “Hibernate” partition size, we recommend that you create a
144-MB partition, the same as the factory default.
Do not interrupt the Hibernate partition process or unplug the ac adapter until
complete.
13. Restart the OmniBook.
14. Press Esc during the Boot process.
15. Insert the OmniBook 3000 Recovery CD.
16. Select the CD-ROM Drive then press Enter.
17. Choose Exit to MS-DOS from the menu.
18. Run FDISK to repartition the hard disk. (If you are going to install Windows NT
this step is unnecessary. You can repartition the disk during the NT install.)