Filter
Top Products
Using Windows 95
Installing Windows 95
3-7
To install sound support
Requirements
♦ OmniBook 3000 with Windows 95 installed.
♦ OmniBook 3000 driver for sound support.
Location: OmniBook hard drive or Recovery CD in
\OMNIBOOK\DRIVERS\WIN95\SOUND.
1. From Control Panel, double-click Systems.
2. Click Device Manager.
3. Open the Unknown device under Other Devices, and confirm the following
resources in the Resource tab
Direct Memory Access 01
Direct Memory Access 00
Interrupt Request 05
Input/Output Range 0530-0537
Input/Output Range 0388-038B
Input/Output Range 0220-022F
4. Click on the Driver tab, then click Change Driver.
5. Select Other detected devices then click OK.
6. Click Have Disk.
7. Enter the directory of the sound drivers and click OK.
8. Click OK to accept Crystal PnP Audio System CODEC.
9. Click OK to close the Unknown Device Properties window.
10. If prompted, insert the Windows 95 Installation CD and change the directory to
D:\WIN95 or change the directory to C:\WINDOWS\OPTIOS\CABS, then click
OK.
11. Open the other Unknown device under Other devices.
12. Click on the Driver tab, then click Change Driver.
13. Select Other detected devices then click OK.
14. Click OK to accept Crystal PnP Audio System Control Registers.