Filter
Top Products
Expanding the OmniBook
Using Plug-In Modules
66 Reference Guide
3. Slide the CD-ROM tray back into the module to close it.
If you lose power to the OmniBook, or if you have removed the CD-ROM or DVD
module from the OmniBook, you can manually open the drive to remove a CD.
• Insert a straightened paper clip into the recessed hole on the front of the drive, as
shown above.
Note
For Windows 95, 98, and NT, your OmniBook has been configured at the factory to
disable CD Auto Insert notification. This allows your system to suspend on time-out.
However, you may notice that Windows 95 or Windows 98 may not automatically
detect the insertion of a CD. For Windows 2000, your OmniBook has been configured
to enable CD Auto Insert notification. This does not affect time-outs.
To play DVD movies
If your OmniBook came with a DVD drive, you can install DVD player software that lets
you play DVD movies. Do the following to install the play software.
• Run Setup on the software CD.