Filter
Top Products
Expanding the OmniBook
Connecting External Devices
Reference Guide 71
To connect a serial mouse
For Windows 95, 98, and NT
1. Connect the serial cable to the serial port.
2. From the Start menu, click Settings, Control Panel.
3. Double-click Mouse, then click General.
4. Click Change and then select Show All Devices.
5. Under Manufacturers, click Standard Mouse Types.
6. Under Models, change the mouse type to Standard Serial Mouse, then click OK.
For Windows 2000
1. Connect the serial cable to the serial port.
2. Press the blue power button to suspend the OmniBook, then press it again to turn the
OmniBook back on. Wait several seconds for Windows to find the new device.
To connect USB devices
Note
Windows NT 4.0 does not support universal serial bus (USB) devices.
Universal serial bus (USB) provides a bidirectional serial interface for adding peripheral
devices such as game controllers, serial and parallel ports, and scanners on a single bus.
The OmniBook provides one USB port; the OmniBook docking products provide two
USB ports.
• Attach the USB cable to the USB port. Windows 95, Windows 98, and Windows
2000 automatically recognize the USB device. Some USB devices can be connected
to the OmniBook in series with other USB devices—this is called a “daisy-chain”
connection.
Note
If you have problems making this connection, contact the vendor of the peripheral
device, as well as the OmniBook website, for the latest versions of the USB drivers. The
USB technology is dynamic and continues to develop.
If the device is not recognized, you may need to install a driver. Contact your device
vendor.