Filter
Top Products
Expanding the OmniBook
Using PC Cards
74 Reference Guide
Using PC Cards
To insert and remove a PC Card
Note
Windows NT 4.0 does not support zoomed video. If you are using Windows NT 4.0,
make sure Card Executive is installed (see “To install Card Executive for Windows
NT” on page 75).
The OmniBook PC Card slots are available for storing data and expanding the
communication capabilities of the OmniBook. The OmniBook supports standard Type I,
II, and III PC Cards (PCMCIA and CardBus). You can use two Type I or II cards or one
Type III card. The lower slot supports Zoomed Video, which allows high-quality
multimedia presentations.
1. Hold the card with its face up and its connector holes toward the card slot.
2. Slide the PC Card into the slot until it is flush with the OmniBook.
3. Before removing the card, click the PC Card or Eject Hardware icon in the taskbar,
then click Stop (for Windows 95, 98, and 2000 only). This protects your data and
avoids unexpected problems. You can restart the card by removing it, then
reinserting.
4. To remove the card, flip out the hinged eject button next to the PC Card. Push the
button to pop out the card, then fold the button closed.