Filter
Top Products
21
Click the [Apply] button to save the settings.
3.1 Projector Web Control - Network Settings (continued)
Item 'HVFULSWLRQ
Wired Setup Congures the wired LAN settings.
,3&RQ¿JXUDWLRQ Congures network settings.
'+&321 Enables DHCP.
'+&32)) Disables DHCP.
IP Address Congures the IP address when DHCP is disabled.
Subnet Mask Congures the subnet mask when DHCP is disabled.
'HIDXOW
Gateway
Congures the default gateway when DHCP is disabled.
'166HUYHU$GGUHVV Congures the DNS server address.
Other Setup Congures other network settings.
Crestron e-Control
Set whether to or not to use Crestron e-Control
®
.
If you choose Disable, the Logon window of Projector Web
Control and not the selection window will be displayed at rst
of the Web Control.
3. Web Control
• The new conguration settings are activated after restarting the
network connection. When the conguration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu (
41).
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
• The WEP Key, WPA passphrase and SSID settings will not be set if the invalid
characters are used.
• The projector does not allow both wireless and wired LAN to be connected to
the same network. Do not set the same network address for both wireless and
wired LAN.
NOTE