Hitachi CP-X3021WN Projector User Manual


 
73
SECURITY menu
Item Description
PRESENTATION
(continued)
MULTI PC
MODE
(continued)
• To change from Single PC mode to Multi PC mode,
press button to choose OK in the dialog and press
the ENTER or INPUT button.
The display mode is changed.
For details on how to switch the
display mode to Multi PC mode
on your computer, refer to the
manual for
“LiveViwer”
.
• The Presenter mode setting of the selected
computer becomes valid when the display mode is
changed to Single PC mode.
Also, the Presenter mode setting
becomes invalid when the
display mode is changed to Multi
PC mode, regardless the setting
on the computers.
For details,
refer to the manual for “LiveViewer”.
DISPLAY
USER NAME
Selecting this item displays the user name. This
function helps you identify from which computer the
current image is sent.
• You can set user names for each computer on
“LiveViwer”. For details,
refer to the manual for
“LiveViwer”.
SERVICE
Executing this item restarts and initializes the network functions.
Choose the NETWORK RESTART EXECUTE using the button .
Then use the button to execute.
Network will be once cut off when choose restart.
If DHCP is selected on, IP address may be changed.
After selecting NETWORK RESTART EXECUTE, NETWORK menu
may not be controlled approx. 30 seconds.