Filter
Top Products
20
1.
Make sure that the power cord is firmly and correctly connected to both the
projector and power outlet.
2.
Open the lens cover, and set the power switch to
the ON position.
The power indicator will light a steady orange. Then
wait several seconds because buttons may not
function for the first several seconds the projector
is turned on.
3.
Press the STANDBY/ON button on the projector or
the POWER button on the remote control.
The projector lamp will light up and the POWER
indicator will begin blinking in green. When the
power is completely on, the indicator will stop
blinking and light a steady green.
Projection
Projection
Turning the power on
► When the power is on, a strong light is emitted. Do not look
into the projector lens or openings.
WARNING
• Turn the power on in the correct order. Turn on the projector before
the connected devices.
NOTE
STANDBY/ON button
POWER button
POWER indicator
POWER LIGHT
BLACK
ASPECT
MENU
BRIGHTCONTRASTCOLOR
IRIS
MODE
MEMORY
ENTER
RESET
HDMI
PC
AUTO
COMPO
S-VIDEO
VIDEO
POWER
MENU
ENTER
LAMP
TEMP
STANDBY/ON
INPUT
RESET
POWER
(Steady orange)
PO
WER
（Blinking in green
）
PO
WER
（Steady green
）