Filter
Top Products
41
ENGLISH
Advanced Menu (PICTURE menu)
Item Description
IRIS
Using the ▲/▼ cursor buttons adjusts the picture.
Bright
Dark
- NOTE -
• The IRIS function can also be accessed using the IRIS button and
▲/▼ cursor buttons on the remote control (25).
BLACK
Using the ▲/▼ cursor buttons changes the auto iris control mode as
follows.
TURN OFF
AUTO1
AUTO2
TURN OFF
The auto iris is always open.
AUTO1
The auto iris displays a better black for dark images.
AUTO2
The auto iris displays the best black for dark images.
- NOTE -
• The screen may flicker when the AUTO1 or AUTO2 modes are
selected. If this occurs, select TURN OFF.
• The BLACK function can also be accessed using the BLACK
button and the ▲/▼ cursor buttons on the remote control (27) or
via the EASY MENU (
32).
MY MEMORY
This projector provides 4 memories to save user adjustment settings.
The brightness, contrast, color, tint, sharpness and iris adjustment
settings, and selected modes for gamma, color temperature, black,
whisper and digital shutter can be saved to each memory.
To load saved adjustment settings
Using the ▲/▼ cursor buttons in the MY MEMORY menu
changes the memory to be adjusted, memories in which
no data is saved are skipped. The mode that the yellow
highlight bar is on is the currently selected mode. Then
press the ► cursor button to load the selected mode.
1. CUSTOM-1
2. CUSTOM-2
3. CUSTOM-3
4. CUSTOM-4
SAVE
- NOTE -
• The numbers to the left of each memory cannot be changed but
the name to the right can be changed.
• The SAVE item is not a memory but an item to display the MY
MEMORY menu and save to the currently selected memory. Please
refer to the following description about save.
• When a signal other than the signal used when the adjustment
settings were registered is input, the saved adjustment settings may
not display the signal image correctly.
(Continued on next page)
MY MEMORY
1.CUSTOM‑1
2.CUSTOM‑2
3.CUSTOM‑3
4.CUSTOM‑4
SAV
E
MY MEMORY
menu (small)