Filter
Top Products
Place the original face down on the scanner glass, as indicated by the reference mark.
NOTE: In the scanning software, choose the layout setting that matches the
orientation of the original on the scanner glass.
How to scan
The basic steps for scanning are:
1. Load the originals.
2. Do one of the following:
•Press the Scan (
) button on the scanner front panel to start scanning with the
assigned software (and profile, if appropriate).
• On the computer, open the scanning software, and then select the ISIS or TWAIN
data source. Select the appropriate settings, and then initiate a scan.
TIP: To reduce paper jams, use scan settings that specify the actual dimensions
of the pages that you are scanning.
TIP: If you select duplex scanning or copying and you load the originals into the
automatic document feeder (ADF), the scanner processes both sides of a two-
sided original at the same time.
Chapter 1
10 Use the scanner