Filter
Top Products
4. If you are replacing an empty print cartridge, slide it to the right to remove it from the
cartridge stall.
5. Remove the print cartridge from its packaging. Pull the tab to remove the protective
tape from the nozzles.
6. Hold the new print cartridge with the nozzles down and slide it into the cartridge stall.
7. Lower the cartridge stall latch to lock the print cartridge in place.
8. Grasp the center of the ADF input tray, and then lower the ADF input tray into position
for scanning.
9. Update the imprinter history:
a.
Press the Tools (
) button on the scanner front panel to open the HP Scanner
Tools Utility. Click the Imprinter tab.
b.In the Cartridge Status section, click Record Replacement.
Position the imprinter
The position of the imprinter determines the left-right location of the imprinter mark on the
scanned page.
NOTE: For narrow pages, if the imprinter is positioned outside of the width of the
paper in the ADF input tray, the imprinter is not able to print on the scanned pages.
In this case, the scan does not complete and an error message is displayed on the
computer screen.
Set up and use the imprinter 19