Filter
Top Products
Icon Button name Description
begin scanning again, press the Power Save
button to wake up the scanner.
See also
“
Scanner LEDs” on page 29
Scanner lamp setting
The scanner supports two modes of lamp operation:
• In Power Save mode, the scanner lamp times out and turns off automatically after
about 15 minutes of inactivity. When you are ready to begin scanning again, press
the Power Save button to wake up the scanner.
• In Instant Lamp On mode, the scanner lamp times out and turns off automatically
after about 15 minutes of inactivity, but it remains warm and ready to scan.
To switch from Power Save mode to Instant Lamp On mode, select the Enable Instant
Lamp On check box on the Buttons tab of the HP Scanner Tools Utility. To switch back
to Power Save mode, clear the Enable Instant Lamp On check box.
Load original documents
You can scan up to 200 single- and double-sided document pages from the automatic
document feeder (ADF), and you can scan one side of a document directly from the
scanner glass.
The section contains the following topics:
•
Use the automatic document feeder
•
Load an original on the scanner glass
Use the automatic document feeder
For helpful information on loading your documents properly, refer to the following topics.
•
Document loading tips
•
How to load documents
Document loading tips
• The automatic document feeder (ADF) supports the following paper types.
Width: 70–300 mm (2.75–11.8 in)
Length: 148–864 mm (5.8–34 in)
(continued)
Load original documents 5