Honeywell MS9520 Scanner User Manual


 
5–2
Concatenation Configuration Mode
The following bar codes are used to configure variable time requirements used
to find the second bar code of the ISBT concatenation sequence.
³ 3 0 1 3 1 0
100 msec to Find Concatenation Sequence
³ 3 0 1 3 2 0
200 msec to Find Concatenation Sequence
³ 3 0 1 3 3 0
300 msec to Find Concatenation Sequence
³ 3 0 1 3 4 0
400 msec to Find Concatenation Sequence
³ 3 0 1 3 5 0
500 msec to Find Concatenation Sequence
³ 3 0 1 3 6 0
600 msec to Find Concatenation, Sequence
³ 3 0 1 3 7 0
700 msec to Find Concatenation Sequence
Pre-Defined Concatenation Configuration Mode
The first two bar codes below enable or disable pre-defined concatenation
sequences. The remaining bar codes enable the specific pre-defined
concatenation sequence shown, but are not needed to enable concatenation.
They can be used to disable or re-enable any selected pre-defined
concatenation sequence.
³ 1 3 8 4 1 3
Enable Pre-Defined Concatenation Sequence
³ 1 3 8 4 0 3
Disable Pre-Defined Concatenation Sequence
³ 4 3 8 4 8 0
Donation Identification Number + AB0/Rh (D)
Blood Groups =á + =% Concatenation
† This feature is only supported in the MS9500 Voyager product series.