Filter
Top Products
11–4
Special Keyboard Features
³ 1 1 6 3 1 1
Transmit Make Code Only – Not available on
all models.
³ 1 1 6 3 0 1
* Transmit Make/Break Code – Not available on
all models.
³ 1 1 6 3 1 0
* Transmit FOH Break Code – The scanner will
transmit the FOH in the break-code sequence.
³ 1 1 6 3 0 0
Do Not Transmit FOH Break Code
³ 1 1 6 3 1 5
Transmit Cleanup Bit – Use for certain NEC
computers.
³ 1 1 6 3 0 5
* Do Not Transmit Cleanup Bit
³ 1 1 6 2 1 7
Enable Alt-Mode – See Enable ALT-Mode
(Normal) for description.
³ 1 1 6 2 0 7
* Disable Alt-Mode – Caution: If host software
application uses the right Alt key as a “Hot” key,
Alt-mode must be disabled.
†
These settings only apply if the Alt-Mode (shown above) is enabled.
³ 1 1 6 7 0 6
* Enable Alt-Mode (Normal)
†
The scanner will duplicate the following keyboard
sequence; Hold down the Alt key and Type the
three digit decimal number that corresponds to
the appropriate character.
³ 1 1 6 7 1 6
Enable Alt-Mode (Advanced)
†
The scanner will duplicate the following keyboard
sequence; Hold down the Alt key and Type the
four digit decimal number that corresponds to the
appropriate character.