Filter
Top Products
11 - 18
10. Verify the device is authenticated by reviewing the Status tab. When the device is property configured, the Status
(page 11-11) indicates the device is Authenticated and the method used.
11. The sign-on screen is displayed after a reboot.
Note: See Configuring Profiles (page 11-21) for more details.
If a user enters invalid credentials and clicks OK, the device associates but does not authenticate. The user is again
prompted to enter credentials.
If the user clicks the Cancel button, the device does not associate. The user is not prompted again for credentials until:
• the device is rebooted,
• the radio is disabled then enabled,
• the Reconnect button on the Diags Tab is tapped or
• the profile is modified and the Commit button is tapped.