HotBrick, Tel: 305
-
398
-
0888, Fax: 305
-
398
-
5966
Web Server
(192.168.1.45)
PC using FTP Server
(ftp://205.20.45.34)
FTP Server
(192.168.1.20)
205.20.45.34 (WAN) 192.168.1.1 (LAN)
PC using Web Server
(http://205.20.45.34) Multi-WAN VPN Link Balancer
Note that, in this illustration, both Internet users are connecting to the same IP Address, but using different
protocols.
Connecting to the Virtual Server
Once configured, anyone on the Internet can connect to your Virtual Servers. They must use
the Dual WAN VPN Firewall Internet IP Address (the IP Address allocated by your ISP). e.g.
http://205.20.45.34
ftp://205.20.45.34
To Internet users, all virtual Servers on your LAN have the same IP Address. This IP
Address is allocated by your ISP.
This address should be static, rather than dynamic, to make it easier for Internet users to
connect to your Servers. However, you can use the Dynamic DNS feature (explained later
in this chapter) to allow users to connect to your Virtual Servers using a URL, instead of an
IP Address.
e.g.