Filter
Top Products
HotBrick, Tel: 305
-
398
-
0888, Fax: 305
-
398
-
5966
Advanced Configuration - Multi DMZ
This feature allows each WAN port IP address to be associated with one (1) computer on
your LAN. All outgoing traffic from that PC will be associated with that WAN port IP address.
Any traffic sent to that IP address will be forwarded to the specified PC, allowing unrestricted
2-way communications between the "DMZ PC" and other Internet users or Servers.
Note:
The "DMZ PC" is effectively outside the Firewall, making it more vulnerable to attacks. For
this reason, you should only enable the DMZ feature when required.
Multi DMZ
Enable – Use this to enable or disable the DMZ setting, as required.
WAN – there is 1 WAN port. Its connection type may change based on your WAN
connection type (Static/DHCP/PPPoE).
Name – Enter a name for this setting. This name has no effect on the functionality.
Private IP Address (LAN) – Enter the IP address of the PC you wish to associate
with this WAN port IP address. This IP address should be fixed, or reserved. (See
the Host IP section for details on reserving an IP address.)
Access Group –You can define the users who have authority to use the DMZ by
defining the group/s (Host IP web page)
Direction –For the DMZ, you can allow inbound only, outbound only, or both inbound and
outbound traffic.
Multi DMZ List - Multi DMZ List shows the details of all DMZ configuration data
that is currently defined. You can modify configuration data by mouse-clicking on
the row.
35