HotBrick VPN 1400/2 Network Router User Manual


 
HotBrick, Tel: 305
-
398
-
0888, Fax: 305
-
398
-
5966
Dynamic DNS Service
This pull-down menu can Enable/Disable the Dynamic DNS feature, and select the required
service provider.
Disable – Dynamic DNS is not used.
TZO – Select this to use the TZO service (www.tzo.com). You must configure the
TZO section of this screen.
DynDNS – Select this to use the standard service (from www.dyndns.org or another
provider). You must configure the Standard Client section of this screen.
3322(in China) – This service is available in China. It is similar to “DynDNS”
User Defined DDNS Server – This is the user defined DDNS server. If the DDNS
is not TZO, dyndns.org and 3322.
Additional settings
These options are available if using the standard client.
Enable Wildcard – If selected, traffic sent to sub-domains (of your Domain name)
will also be forwarded to you.
Enable backup MX – If enabled, you must enter the Mail Exchanger address
below.
Mail Exchanger – If the setting above is enabled, enter the address of the backup
Mail Exchanger.
WAN Port Binding
Select the WAN port used by the Dynamic DNS service.
The "Force Update" button will update your record on the Dynamic DNS Server
immediately.
34