Filter
Top Products
HRView Function Manual 5. HRView Operating Guide
5-3
5.2. Password Input for Ethernet Access
If last communication setup was Ethernet, an ID and password input dialog box will appear.
This process is for authentication to access the controller of the IP address shown in the
dialog box. To access the controller of the IP address, input ID and password, and click OK
button. Then, the controller will be connected and HRView will start.
If the controller in the dialog box is not the right one, click Cancel button. Then, HRView will
start, but the controller will not be connected.
Fig 5.2 ID and password input dialog box