Filter
Top Products
Argecy Computer Corporation 248-324-1800
109
What this message means:
Data has been sent to the printer through a serial port, but the serial port is disabled.
What you can do:
• Press Go to clear the message. The printer discards any data received through the serial port.
• Make sure the Serial Buffer menu item in the Serial Menu is not set to Disabled.
58 Too Many
Disks Installed
What this message means:
Too many hard disks are installed on the printer. The printer only supports one hard disk at a
time.
What you can do:
Turn off and unplug the printer. Remove the excess hard disks from the printer. Plug in the
printer and turn it on.
58 Too Many
Flash Options
What this message means:
Too many flash memory options are installed on the printer.
What you can do:
Turn off and unplug the printer. Remove the excess flash memory. Plug in the printer and turn
it on.
56 Serial
Port <x> Disabled