Filter
Top Products
Argecy Computer Corporation 248-324-1800
78
Infrared adapter If infrared communication stops or does not occur, make sure:
• The distance between the two infrared ports is 1 m
(39 in.) or less. If communication does not occur between ports, move the ports
closer together.
• Both ports are stable.
• The computer and the printer are on a level surface.
• The angle of communication between the two infrared ports is within 15 degrees
of either side of an imaginary line drawn between the two infrared ports.
• No bright light, such as direct sunshine, is interfering with communication. No
objects are placed between the two infrared ports.
Internal print server • Make sure the internal print server (also called an internal network adapter or
INA) is securely connected to the printer system board.
• Make sure you are using the correct cable, that it is securely connected, and that
the network software is correctly set up.
Refer to the drivers CD for more details.
Printer memory Check to make sure printer memory is securely connected to the printer system
board.
Tri-Port Adapter • Make sure the Tri-Port Adapter is securely connected to the printer system board.
• For Macintosh computer users, make sure the host computer is set to LocalTalk.
• If you are using a phone wire connection, use a terminator plug.
USB/Parallel interface • Make sure the USB/parallel interface card is securely connected to the printer
system board.
• Make sure you are using the correct cable and that it is securely connected.
Options Action