Filter
Top Products
28 User Guide
Viewing and changing settings
The IBM Setup Utility menu displayed by your computer might look slightly
different from the menu shown here, but it will operate the same way.
The program menu lists items that identify system configuration topics. You
might see symbols next to configuration menu items. The followingtable explains
these symbols.
• An additional submenu or screen is available
° A change to that item has been made in the system configuration, or the
program has detected an error and attempted to correct it. Also, an
additional menu might follow a menu item with a ° beside it.
∗ A system resource conflict was detected. Resolve this conflict before
exiting from the program so that your computer will function properly.
[] In the program menus, the information you can change is enclosed in
brackets like these. You cannot change information that is not enclosed
in brackets.
IBM Setup Utility
__________________________________________________________________
Main Devices Startup Advanced Security Power Exit
__________________________________________________________________
> System Summary
Product Data:
MachineType/Model XXXX/XXXX
Flash EEPROM Revision Level 22KT05AUS
Boot Block Revision Level 2205A
System Board Identifier XXXXXXXXX
System Serial Number XXXXXXXXX
BIOS Date (MM/DD/YY) XX/XX/XX
>SystemUUID
System Time (HH:MM:SS): [XX:XX:XX]
System Date (MM/DD/YYYY): [XX/XX/XXXX]
Language: [English (US]
__________________________________________________________________
F1: Help ↑↓: Up/Down -/+: Select Values F9: Setup Defaults
Esc: Exit ←→: Left/Right Enter: Select F10: Save & Exit