Filter
Top Products
Analyze Adapter Internal Log
The PCI RAID adapter has an internal log that logs information about the adapter and
the disk drives attached to the adapter. Whenever data is logged in the internal log, the
device driver copies the entries to the AIX system error log and clears the internal log.
The Analyze Adapter Internal Log service aid analyzes these entries in the AIX system
error log. The service aid displays the errors and the associated service actions. Entries
that do not require any service actions are ignored.
When running this service aid, a menu is presented to enter the start time, the end
time, and the file name. The start time and end time have the following format:
[
mmddHHMMyy
]. (where
mm
is the month (1-12),
dd
is the date (1-31)
HH
is the hour
(00-23)
MM
is the minute (00-59), and
yy
is the last two digits of the year (00-99). The
file name is the location where the user wants to store the output data.
To invoke the service aid task from the command line interface:
diag -c -d devicename -T "adapela [-s start date -e end date]
Flag Description
-c Specifies not console mode.
-d
devicename
Specifies the device whose internal log you
want to analyze (for example, SCRAID0)
-s
start date
Specifies all errors after this date are analyzed.
-e
end date
Specifies all errors before this date are
analyzed.
-T Specifies the Analyze Adapter Internal Log task
Note: To specify a file name from the command line, use the redirection operator at the
end of the command to specify where to send the output of the command, for
example > filename (where filename is the name and location where the user
wants to store the output data (for example, /tmp/adaptlog).
Backup and Restore Media
This service aid allows verification of backup media and devices. It presents a menu of
tape and diskette devices available for testing and prompts for selecting the desired
device. It then presents a menu of available backup formats and prompts for selecting
the desired format. The supported formats are tar, backup, and cpio. After the device
and format are selected, the service aid backs up a known file to the selected device,
restores that file to /tmp, and compares the original file to the restored file. The restored
file remains in /tmp to allow for visual comparison. All errors are reported.
108 pSeries 630 Model 6C4 and Model 6E4 User’s Guide