Filter
Top Products
v Read Service Processor Configuration
Displays current service processor configuration.
v Processor Configuration/Deconfiguration Menu
Enable/Disable CPU Repeat Gard
CPU repeat gard will automatically deconfigure a CPU during a system boot
if a processor has failed BIST (power-on self-test), caused a machine check
or check stop, or has reached a threshold of recoverable errors. The
processor will remain deconfigured until repeat gard is disabled or the
processor is replaced.
The default is enabled.
For more information, see “Configuring and Deconfiguring Processors or
Memory” on page 64.
Runtime Recoverable Error Repeat Gard
The runtime recoverable error repeat gard flag controls the deallocation of
the memory if a recoverable error occurs during runtime. If a recoverable
memory error occurs, and runtime recoverable error repeat gard is disabled,
the system will continue running with no change in the memory
configuration. If a recoverable memory error occurs, and runtime
recoverable error repeat gard is enabled, the memory quad in which the
error occurred will be garded out (taken offline).
The default is disabled.
This menu allows the user to change the system processor configuration. If it is
necessary to take one of the processors offline, use this menu to deconfigure a
processor, and then reconfigure the processor at a later time. An example of this
menu follows:
PROCESSOR CONFIGURATION/DECONFIGURATION MENU
77. Enable/Disable CPU Repeat Gard: Currently Enabled
1. 0 3.0 (00) Configured by system 2. 1 3.1 (00) Deconfigured by system
3. 24 4.0 (00) Configured by system 4. 25 4.1 (00) Configured by system
98. Return to Previous Menu
0>
Note: This table is built from vital product data collected during the last boot
sequence. The first time the system is powered on, or after the system’s
nonvolatile RAM (NVRAM) has been erased, this table may be empty. The
table is rebuilt during the next boot into AIX.
The fields of the previous table represent the following:
Column 1
(1.) Menu selection index.
46 pSeries 630 Model 6C4 and Model 6E4 User’s Guide