Filter
Top Products
IBM ARTIC960 Run Time Enviornment (RTE) Version 1.3 (or later)
Support for AIX Installation
The IBM ARTIC960 Run Time Enviornment (RTE) Version 1.3 (or later) Support for
AIX must be installed on your system for the IBM ARTIC960RxD Quad DTA to
function. This software is provided on the CD-ROM that came with this product. If
your system is currently on, you may install the device drivers now. If your system is
currently off, you may install the device drivers after installing the adapters.
Note: If you are using the RxD with the IBM DirectTalk for AIX (DT/AIX) software,
the IBM ARTIC960 Run Time Environment (RTE) software (including the device
drivers and RxD support) is installed automatically as part of the DirectTalk for AIX
install process. Refer to the DT/AIX installation guide for further information.
To install the IBM ARTIC960 RTE Version 1.3 Support for AIX:
1. Turn on your system unit.
2. Log in as root.
3. Insert the CD-ROM into the CD-ROM drive.
4. At the command line, type smitty devinst and press Enter.
5. Press F4.
6. Select the CD-ROM option and press Enter.
Note: The installation will start. The message OK will display when the
installation is completed.
7. If you are ready to install the adapter at this time:
a. Type shutdown -F and press Enter to shutdown your system.
b. Skip to “Jumper Installation Information” on page 1-3.
8. If you have already installed the adapter cards:
a. Type shutdown -Fr and press Enter to reboot your system.
b. Log in again as root. The adapters should now be configured and the
system should be ready for use.
1-2 Installation and User's Guide