Filter
Top Products
Connector Pin Numbers and Assignments
This section provides pin numbering and signal assignments for each of the optional
cables. For each cable, a table shows the pin assignments for the 36-pin connector
and the correlation to the four port connectors. Each signal is identified as input (I)
or output (O), as viewed from the Quad T1/E1 DTA.
36-pin Connector
The individual signals for all ports connect to the Quad T1/E1 DTA through the
36-pin connector at the rear of the card. The following shows the male 36-pin
connector at one end of the cable.
Note: A relay on the mezzanine card can be used to generate an external alarm.
The standard cables do not provide support for this function. For more
information, refer to the technical reference for the IBM ARTIC960RxD Quad
Digital Trunk PCI Adapter, which is available on the Web (see “Operating
System Support Programs and Publications” on page 2-5).
6-4 Installation and User's Guide