IBM ARTIC960RxD Network Card User Manual


 
H.100, 4-Drop Cable With SC-Bus Converter Connector: This Multi-drop
cable assembly is used to connect the internal busses on up to four IBM
ARTIC960RxD Quad DTAs with H.100 connectors. It has an additional connector to
connect to cable RX. See “SC-Bus, 5-Drop Cable” on page 1-6. This allows
adapters with SC-Bus connectors to be used with the IBM ARTIC960RxD PCI
Adapters and other adapters that have H.100 connectors.
The following figure illustrates the internal cabling for up to four IBM ARTIC960RxD
Quad DTAs with an additional connector to the SC-Bus 5-drop cable with SC-Bus
converter connector. Refer to Table 1-1 on page 1-3 to position the jumper on
JP01 on the base card.
H.100, 4-Drop cable with SC-Bus Converter Connector
SC-Bus
Converter
Connector
RY
Table 1-4. H.100, 4-Drop Cable with SC-Bus Converter Connector Cable Information
Cable
Letter
Cable Name/ Description Part
Number
Feature
Code
Length
m ft
RY H.100, 4-Drop Cable with SC-Bus
Converter Connector
08L1219 2879 0.176 0.58
Note: This cable is referred to as the Four-drop, H.100 Cable with SC-Bus
Converter in other publications associated with this cable.
Chapter 1. Installation 1-7