Filter
Top Products
E1 BNC Connector (Ungrounded)
The following illustration shows a BNC connector. Table 6-6 lists the pin
assignments for the E1 BNC electrical interface. The “x” in the signal name is the
number of the port. The ID is Ch for the E1 ungrounded BNC.
Table 6-6. E1 BNC Connector (Ungrounded) Pin Assignments
Signal Name I/O
36-pin Connector
BNC
Connector0 1 2 3
TX1_x O 33 29 23 19 TX inner
conductor
RX1_x I 35 31 25 21 RX inner
conductor
RX2_x I 36 32 26 22 RX outer
conductor
FGND,
TX2_x
--- Housing, 20, 24, 30, 34 TX outer
conductor
6-8 Installation and User's Guide