Filter
Top Products
Using the Function Key: Each time you press the
Function key ( ), one of the following messages (called
On-Screen Message
) appears at the top left corner of the
LCD.
The changed values are automatically saved when you
return to the “TV Channel” On-Screen message. The
values are not saved when you power-off the TV Tuner
without returning to this message.
Message
on LCD
Parameter
(xx)
TV Channel
By using
and , you can select the
channels from 2 to 69.
COL
Color Adjustment
By pressing and holding
or , you can
change the color.
TNT
TINT Adjustment
By pressing and holding
or , you can
change the tint.
BRT
Bright Adjustment
By pressing and holding
or , you can
change the brightness.
CNT
Contrast Adjustment
By pressing and holding
or , you can
change the contrast.
---
(No function)
Reserved.
LO
HI
Auto Tune Sensitivity Selection
LO: Means the sensitivity of the TV is
low. In this mode, the TV Tuner
receives strong TV signals only. To set
LO, press .
HI: Means the sensitivity of the TV is
high (factory default). In this mode, the
TV Tuner receives weak and strong TV
signals. To set
HI, press .
D3S
DON
Time On-Screen Message appears
D3S: On-Screen Message appears for 3
seconds. To set
D3S, press .
DON: On-Screen Message always
appears. To set
DON press
Common Devices Checkout 691