Filter
Top Products
Replacing the Power Supply for 14T and 24x Models
1 Place the power supply on top of the insulator, being sure the regulator pro-
tection tab is perpendicular to the base of the unit. Replace the four hex
screws.
Fan Cable
LED Panel Cable
Power Supply Cable
Reset Cable
AC Power Ground
AC Power Cable
Figure 4-29. Connections to the Power Supply (14T and 24x Models)
2 Replace the connector to the ac power source.
3 Replace the connector from the adapter power supply, if installed, to the ac
power source.
Chapter 4. Removal and Replacement Procedures 4-25