Filter
Top Products
5 Attach the 14.4 Kbps Modem Port Feature to the system board by inserting
the alignment post through the top of the modem and screwing in the post.
6 Using the two screws from the blank faceplate secure the front of the Modem
Card faceplate to the frame of the 2210.
7 Replace the cover as described in “Reinstalling the Cover” on page 4-4.
8 Verify the IBM 2210 is functioning correctly by using “MAP 0210: Verify
Operation” on page 2-23.
Removing the 14.4 Kbps Modem Port Feature in Models 14T and 24x
1 Remove the cover from the IBM 2210 as described in “Cover” on page 4-2.
2 Remove the two screws that secure the 14.4 Kbps Modem Port Feature to
the IBM 2210 frame.
3 Unscrew the alignment post and remove it from the modem.
4 Remove the 14.4 Kbps Modem Port Feature connection from the system
board.
5 Lift the 14.4 Kbps Modem Port Feature out of the IBM 2210 chassis.
Chapter 4. Removal and Replacement Procedures 4-41