Filter
Top Products
9 Verify that the IBM 2210 is functioning correctly by using “MAP 0210: Verify
Operation” on page 2-23.
Removing the Optional Adapter
Figure 4-40. Removing the Adapter (Actual adapter may appear different)
1 Unplug the power cord.
2 Remove the screws holding the adapter in place.
3 Remove the adapter by gently pulling it toward you.
4 Replace the blank faceplate or install new adapter and tighten the two
screws.
5 Plug the power cord into the outlet.
6 Verify that the IBM 2210 is functioning correctly by using “MAP 0210: Verify
Operation” on page 2-23.
4-38 2210 Service and Maintenance