Filter
Top Products
300 bps–38.4 Kbps bit rate
| The terminal speed must match the serial port speed.
The following terminals are also supported:
IBM 3101 Display Terminal
IBM 3151 ASCII Display Station
IBM 3161 ASCII Display Station
Configure these terminals as shown in “Setup Attributes.”
Setup Attributes
IBM 3101 Setup Attributes
Use Figure A-5 to determine the settings for the setup attributes for the IBM 3101
ASCII terminal.
Figure A-5. Setup Attributes for the IBM 3101 Display Terminal
| The 2210 can use this terminal at all bit rates (in bps) up to 19 200. The terminal
| speed must match the serial port speed.
IBM 3151 Setup Attributes
Activate setup mode in the IBM 3151 terminal by pressing the Ctrl and Setup keys.
The Ctrl key is located on the lower left of the keyboard. The Setup key is located
on the upper right of the keyboard.
Use Table A-2 on page A-6 to help you determine the settings for the setup attri-
butes.
Save the setup information by highlighting the Save function using the cursor keys.
Exit by pressing the Ctrl and Setup keys.
Appendix A. Access Methods and Attaching an ASCII Terminal A-5