Filter
Top Products
DeviceNet to PLCs or Devices
21
Use Input Word xx
If you want to map this word of Input data to a PLC/Device register, select this option. If this option is
not selected, the data in this Input word will be set to 0.
PLC/DeviceAddress
This is the Address of the PLC/Device mapped to this word of Input data. The PLC/Device Address must
be in the range 0 to 255.
File Number (Allen-Bradley PLCs only)
This is the File Number of the register in the PLC mapped to this word of Input data.
Register Number
This is the Register Number in the PLC/Device mapped to this word of Input data. The DN-3000 will
read the value of the register specified by the PLC/Device Address, File Number (Allen-Bradley PLCs
only) and Register Number and place that value in this word of the Input data.